Ultimate Electrical Engineer Course Bundle Part 2

Build a Solid Foundation in Electrical Engineering With Second Ultimate Bundle & Advance Your Knowledge on with This 10-Course, 40-Hour Bundle


After the huge success of the first electrical bundle, we decided to make part 2 for electrical engineers 🙏🙏 ❤️❤️


We are offering you tons of courses in electrical engineering at a very high discount, so you can learn electrical engineering at very affordable price 😊😊

Get started now!



Important Note ⚠️⚠️⚠️⚠️

If you have any trouble in buying the electrical bundle,

You can contact us at

[email protected]demy.com

and we will help you :)

First Course "Fundamentals of Rectifiers in Power Electronics"


This course is designed for anyone who would like to learn about different types of power electronic switches such as uncontrolled, semi-controlled and fully controlled switches


This first course is about rectifiers in power electronics, which are used to convert the voltage from AC into DC voltage, you are going to learn about different circuits of rectifiers such as half wave and full wave rectifiers.


What are we going to learn from this course?


✔️ Definition of power electronics circuit and its application.

✔️ Different types of switches as uncontrolled switches, semi-controlled and fully controlled switches as diodes, thyristors, IGBT, Mosfet,.....

✔️ Types and applications for different switching devices.

✔️ Definition of rectifier.

✔️ Different single-phase rectifier circuits and their configurations.

✔️ Half wave and full wave rectifier single-phase circuits in case of uncontrolled and in case of half and full controlled bridges.

Get started now!



Second Course "Fundamentals of AC Choppers in Power Electronics"


This second course in power electronics is designed for anyone who would like to learn about AC choppers in power electronics, which are used to convert the fixed AC voltage into variable AC by different methods, which will be discussed in the course.

You are going to learn about the different AC chopper circuits in case of R-load, RL series load, RL parallel load and capacitive by using the phase angle control method. You will also learn about the integral cycle control and more.


What are we going to learn from this course?


✔️ AC chopper circuits with R load.

✔️ AC chopper circuits with L load, R-L parallel, and series load.

✔️ AC chopper with capacitive load.

✔️ Integral cycle control of AC chopper with example.

✔️ AC chopper in transformer tap changing.

✔️ AC chopper loaded by an AC motor with back e.m.f.

✔️ Applications and disadvantages of AC choppers.

Get started now!



Third Course "Fundamentals of DC Choppers in Power Electronics"



This third course in power electronics is designed for anyone who would like to learn about DC choppers in power electronics, which are used to convert the fixed DC voltage into variable DC by different methods, which will be discussed in the course.

You are going to learn about the different DC chopper circuits such as step up and step down DC choppers, the buck, boost and buck-boost converters, in addition on how to select components for these circuits.


What are we going to learn from this course?


✔️ Definition of DC choppers and applications of DC choppers.

✔️ Generation of the duty cycle.

✔️ Types of circuits used to step up or step down the DC voltage.

✔️ Analyze of the step-down DC chopper with R and R-L-E load,

✔️ Analyze of the step-up DC chopper with R, RL, and RE loads.

✔️ Analyze of a buck regulator, boost regulator, and buck-boost regulator circuits.

✔️ Equations to get the minimum values of inductance and capacitance required for those circuits.

Get started now!



Fourth Course "Fundamentals of inverters in Power Electronics"


This fourth course in power electronics is designed for anyone who would like to learn about inverters in power electronics, which are used to convert the DC voltage into AC by different methods, which will be discussed in the course.


You are going to learn about the different inverter circuits such as single phase half bridge inverter, single phase full bridge inverter, three phase inverter, single pulse width modulation, multiple pulse width modulation and sinusoidal pulse width modulation.


What are we going to learn from this course?


✔️ Definition of the inverter.

✔️ Importance and applications of inverters.

✔️ Single-phase half-bridge R-load.

✔️ Single-phase half-bridge RL-load.

✔️ Performance parameters of an inverter.

✔️ Single-phase bridge inverter R-load.

✔️ Single-phase bridge inverter RL-load.

✔️ Three-phase inverters and obtaining the line voltages and phase voltages.

✔️ Single pulse width modulation.

✔️ Multiple pulse width modulation.

✔️ Sinusoidal pulse width modulation.

Get started now!



Fifth Course "Complete Light Current Course For Electrical Power Engineering" ⚡️⚡️⚡️



Learn about fire alarm, MATV, telephone, data, CCTV, and sound systems for electrical power engineering.


What are you going to learn in this course?


In Fire Alarm System


  • Components of the fire alarm system.
  • Sensors and detectors as smoke, heat, multidetector,..etc used in a fire alarm system.
  • Outputs of the fire alarm system as a bell, strobe light, or horn.
  • Types of modules used in the fire alarm system.
  • Types of fire alarm control panels as conventional, analog addressable, addressable, and wireless.
  • Types of cables used in the fire alarm system.


In CCTV System


  • Camera selection in CCTV system.
  • Types of the camera according to fixed or movable, resolution, and focal length.
  • Management of CCTV system by using quadrature, multiplexer, matrix switch, and DVR.
  • Different cables used in the CCTV system.


In Telephone System


  • Types of telephone systems.
  • Components of the traditional telephone system.
  • Cables, outlets, and different frames used in the telephone system.


In Data system


  • Function of the data system.
  • Data system outlet and different types of cables used.
  • Patch panel, rack, and switches used in the data system.


In MATV system


  • Components of MATV system.
  • Types of antennas used and frequency.
  • MATV switches, launch amplifier, combiner, and more components.
  • Cables used in the MATV system.

In Sound system


  • Components of the sound system.
  • Types of speakers used.
  • Selection and function of the power amplifier.
  • Function of attenuator, rack, and matrix switch in sound system.

Get started now!



Sixth Course "Complete Generation for Electrical Engineering"



This course is specially designed for anyone who would like to learn everything about the generation of electricity process and different types of generating stations.


What are you going to learn in this course?


✔️ How electricity is generated.

✔️ Different types of electrical generators

✔️ Types of induction and synchronous generators used.

✔️ Types of electrical power plants such as hydro-electric, wind, solar, geothermal, nuclear, and fossil fuel power plants.

✔️ Comparison between different generating power plants according to running costs, fixed costs, typical ramp, and run time.

✔️ Principle of operation of each generating power plant.

✔️ Load demand and how the generating station chosen according to their dispatchability.

Get started now!



Seventh Course "High Voltage Generation For Electrical Engineering" ⚡️⚡️⚡️



This course is specially designed for anyone who would like to learn everything about the fundamentals of generating different high voltage levels.


What are you going to learn in this course?


✔️ Types of high voltages occurring in an electrical system.

✔️ Methods used to generate high voltage AC at power frequency.

✔️ How to generate high voltage AC at high frequency for simulating switching actions on our electrical equipment.

✔️ Definition of impulse waveform in the electrical system.

✔️ Methods of generating high voltage impulses to test our equipment.

✔️ Different methods used to generate very high DC voltage in electrical systems in addition to voltage doubler circuits and multiplier circuits.

Get started now!



Eighth Course "Complete Complex Numbers for Electrical Engineering"



This course is designed for complete beginners who want to learn everything about complex numbers.


In this course we will discuss:


✔️ Definition of imaginary numbers

✔️ Properties of imaginary numbers

✔️ Definition of the complex numbers.

✔️ Operation and properties of complex numbers.

✔️ Graphical representation of complex numbers.

✔️ Polar form, trigonometric form and exponential form of complex numbers.

✔️ Cubic roots of unity.


We will also have step by step examples on each of these topics.

Get started now!



Ninth Course "Applications of MATLAB for Electrical Engineering"



Learn the leading software MATLAB in numerical computing through step by step exercises.


*Course Topics Overview*


  • As an example you will learn the simulation using MATLAB of:
  • Single phase half wave controlled rectifier.
  • Single phase bridge controlled rectifier.
  • Single phase AC chopper with R and RL load.
  • DC-DC converter as buck regulator.
  • Boost regulator.
  • Buck-Boost regulator.
  • Single phase half bridge inverter.
  • Single phase bridge inverter.
  • Three Phase Inverter.

  • You will learn simulation of PV cell in solar energy using Simulink tool in MATLAB.
  • PID controller implementation inside MATLAB and how to tune it.
  • Analyzing data from PSCAD program to MATLAB program.
  • You will learn about separately excited DC Machines and how to:
  • Model the DC machine in no load case using Simulink in MATLAB.
  • Model the DC machine in presence of load torque using Simulink in MATLAB.
  • Simulating the DC machine using power library from Simulink in MATLAB.


  • You will learn about Induction motors as:
  • Construction and principle of operation of induction motor.
  • Torque-speed characteristics of induction motor.
  • Equivalent circuit and power flow of induction motor.
  • Simulation of induction motor using simulink in MATLAB.


Get started now!



Tenth Course "Basics Of PLC Programming From Zero Using LogixPro Simulator"



This course is designed for anyone who has zero knowledge about PLC and would like to learn the basics of PLC and ladder programming.

In this course, we will use logixpro simulator in which we will write the coding and simulate inside the program so that we can see the effect of our ladder diagram.


In this course we will:


✔️ Understand PLC hardware configuration.

✔️ Understand the types of inputs and outputs in PLC.

✔️ Understand the advantages of using PLC over classic control.

✔️ Differentiate between PLC programming languages.

✔️ Learn the definition of PLC scan cycle.

✔️ How to use markers in PLC.

✔️ How to use counters and timers.

✔️ Do tasks in silo, batch, I/O, and door simulators.

Get started now!



⭐Bonus Course⭐


"Complete 2020 ETAP Course for Electrical Engineering" Worth $297

Throughout the course we will cover tons of topics in ETAP program, one of the most important programs for electrical power engineers.


You will learn in this course:


✔️Drawing SLD in ETAP program

✔️Adding components and ratings in ETAP program

✔️ How to do load flow analysis in ETAP

✔️ How to do short circuit analysis in ETAP

✔️ How to do the voltage drop calculations in ETAP

✔️ How to do arc flash studies in ETAP

✔️ How to do transient stability analysis in ETAP

✔️ Definition of harmonics

✔️ How to do harmonic analysis in ETAP

✔️ How to design earthing systems in ETAP

✔️ How to simulate PV system in ETAP

Get started now!



⭐⭐⭐⭐⭐

"Perfect Electrical and Circuits Engineering Certification Bundle! I appreciate so much for its content that is so instructive for many engineering applications! God bless! All the best!"

- Christos, electrical engineer

⭐⭐⭐⭐⭐

"Good for beginner and those interested to learn electrical knowledge. Structured lesson, so beginner can learn easily."

- Lim T., electrical engineer

"There are great courses to learn electric knowledge and help me work. Thanks for the courses and I will continue to learn"

- Quan Q, mechanical engineer

You will also be rewarded with a certificate of completion after completing each course


Get started now!



Your Instructor


Ahmed Mahdy
Ahmed Mahdy

I am Ahmed Mahdy an electrical power engineer, I have been an instructor for more than 5 years in electrical engineering, I have helped more than 50,000 students from more than 170 countries achieving their career success with my simple and easy courses.

I have a YouTube educational engineering channel called" Khadija Academy", I regularly post videos related to electrical engineering there.

I am also an author on Amazon Kindle having 6 books about YouTube and electrical engineering.

My Youtube channel:

https://www.youtube.com/channel/UCwJ4Dv-AqT8Ei-k_0...

Question or query, help is at hand. Contact Khadija Academy customer services from here:

Gmail: [email protected]


Frequently Asked Questions


When does the course start and finish?
The course starts now and never ends! It is a completely self-paced online course - you decide when you start and when you finish.
How long do I have access to the course?
How does lifetime access sound? After enrolling, you have unlimited access to this course for as long as you like - across any and all devices you own.
What if I am unhappy with the course?
We would never want you to be unhappy! If you are unsatisfied with your purchase, contact us in the first 30 days and we will give you a full refund.

Get started now!